GORILLA Waterproof Caulk & Seal 100% Silicone Sealant 295ML (White)

Directions

• TO OPEN:
  CARTRIDGE: Cut nozzle at 45° angle to desired bead size. Puncture inner foil seal.
• TO USE:
  All surfaces should be clean and free of dirt, grease, oil and old sealant. For gaps larger than ½ inch use backer rod. Best if applied above 40°F (5°C).
• 1) Insert into cartridge gun.
• 2) Apply sealant, pushing bead ahead of nozzle.
• 3) Smooth bead immediately after application, before skin forms.
• CLEAN-UP:
  
• Wipe wet sealant off project immediately with a dry cloth. Isopropyl alcohol may be used according to solver manufacturer’s instructions.
• STORAGE:
• Store in cool, dry location with nozzle attached. To re-use product, remove nozzle and clean out cured sealant from the tip.
• LIFETIME GUARANTEE:
• The Gorilla Glue Company warrants this product meets indicated performance properties for as long as you own your home if product is properly used and stored. If not satisfied, return proof of purchase or remaining product for replacement product or refund. Refund will not exceed the full price of the product. The Gorilla Glue Company is not liable for damages in excess of purchase price. No other warranties, either expressed or implied are given or made. You may have rights that vary state to state, so above limitation and exclusions may not apply.