GORILLA Clear Waterproof Patch & Seal Spray (14OZ)

Directions

1. Clean surface of dirt, dust, grease and oil. Make sure surface is dried completely.
2. Shake well. Spray 8″ to 12″ from surface, covering evenly. A test spray on a disposable object is recommended before applying to your project.
3. Apply multiple coats to ensure all cracks and holes have been filled. Allow to cure in between coats and before water exposure. Full cure at 24 hours.

NOTE: Test finished project with light water exposure to ensure all cracks have been filled. If test fails, apply additional coats. Do not use for gaps larger than 1/4.” Apply between 50° F and 120° F.

PAINTING: Works with both latex and oil based paints. When coating with oil based paints, use a primer first before painting.

TIP: To avoid possible clogging, turn can away from body towards a disposable object, turn upside down and spray a short jet of clear gas after completing job.