GORILLA Waterproof Caulk & Seal 100% Silicone Sealant 83ML (Clear)

Directions

All surfaces should be clean and free of dirt, grease, oil and old sealant. Best if used above 40°F.

• TO OPEN:
  CARTRIDGE: Cut nozzle at 45° angle to desired bead size. Puncture inner foil seal.
  TUBE: Unscrew cap, fold and screw-on nozzle. Cut to desired bead size.
• TO USE:
  CARTRIDGE:
• 1) Insert into cartridge gun.
• 2) Apply sealant, pushing bead ahead of nozzle.
• 3) Smooth bead immediately after application, before skin forms.
  TUBE:
• 1) Apply sealant, pushing bead ahead of nozzle.
• 2) Smooth bead immediately after application, before skin forms.
• STORAGE:
  
• Replace cap tightly to prevent material from curing. Store in cool, dry location. To re-use nozzle, remove sealant from nozzle once cured.
• CLEAN-UP:
• Wipe wet sealant off project immediately with a dry cloth. Isopropyl alcohol may be used according to solvent manufacturer’s instructions.