Directions
To Open
- Unscrew and remove nozzle from top of cartridge.
- Set nozzle aside. Cut hard plastic tip of cartridge above the threads.
- Replace nozzle.
TO USE: All surfaces should be clean and free of dirt, grease and oil. Best if used above 40°F.
Cut nozzle at 45° angle to desired bead size.
Insert into cartridge gun.
Apply adhesive to one surface in a zig-zag pattern or inside perimeter of the object. Be careful of squeeze-out. When working on rough, uneven surfaces, use enough adhesive to fill gaps.
Within 10 minutes, press surfaces firmly together. Repositionable for 30 minutes.
NOTE: Heavy items may require temporary support. Use in conjunction with mechanical fasteners when hanging large mirrors.